Wheelchair carrier, assembled in 3D.

Stack D from the 50-lb carrier study: a used power-wheelchair donor stripped to its drivetrain, re-batteried with LiFePO4, and rebuilt as a flat cargo hauler. Press play and watch all eight steps land in order — frame, casters, drive, power, controls, rails, deck, load.

PAYLOAD 50 lb · chair rated 250–300 lb TOTAL $319 at $100 donor · $219 if free TERRAIN gravel · grass · mud · curbs PRICES 11 Nov 2026
STEP 0 / 8
Exploded — nothing fitted yet
GVW 140 lb
50 lb load + ~90 lb chair
~1.0 m/s
Speed

Joystick-limited, walking pace. Report §7, Stack D.

15–20°
Slopes

Gravel / grass / mud and curbs — the step up from the $180 hoverboard build.

60–90 min
Runtime, rough use

~2 h mixed use on 2× 12 V 20 Ah LiFePO4 (512 Wh nominal).

257 N
Worst-case push needed

140 lb GVW on 20° grass: 57.7 lb of tractive force. The donor motors were built for a 250–300 lb occupant — that headroom is the whole point.

Full parts list — Stack D

Every line from the research report, §7. Nothing omitted: controller, drivers, battery, charger and fasteners are all in the total. Prices 11 Nov 2026, USD, before tax/shipping.

PartQtyUnitLine
Save $23 if the joystick works. If the stock joystick/controller tests good, delete the ESP32 + BTS7960 lines and drive it as the manufacturer intended — a $100-donor build drops to ~$296, a free donor to ~$196.

Why this donor wins on a job site

The traps, plainly

How to run the build

The eight steps in the simulator are the build order:

  1. Strip & test the donor — seat and bodywork off, frame kept. Test-drive before paying if you can.
  2. Casters on — check swivel bearings; a seized caster makes it steer like a shopping trolley.
  3. Drive units back in — motors, gearboxes and 12–14-in wheels are one salvaged assembly. This is the money step: new OEM motors run $367–$1,186 each.
  4. Battery swap — two 12 V 20 Ah LiFePO4 in series for 24 V, low and central.
  5. Controls — reuse the stock joystick if it works; ESP32 + BTS7960 only as the fallback.
  6. Angle rails, deck, tub — steel angle (Menards 1½-in × 36-in, $13.99 list) bolted, plywood deck on top, tub bolted through. Load path stays metal — no printed parts in it.

Open questions from the research

Charger, tote and fastener prices marked “est.” in the report had no single citable listing on 11 Nov 2026 — they are honest hardware-store ranges, not quotes. No live checkout was performed; re-check battery and driver listings before buying. Free-donor listings existed in Nov 2026 (Missouri AT swap-n-shop) — availability near you is the open variable that decides $219 vs $319.

Sources