VML 3D Scanner

Real photogrammetry: a 5/8″ die is the only measurement. Click its corners to solve each camera with PnP, then click scene points to triangulate true inches.

Photos
0
Posed
0
Points
0
Status
Idle
Drop photos of a scene with the orange die in frame Same subject, several angles, die visible in each shot. Everything runs locally in your browser — no uploads, no tape measure.

Mark points

1 Die corners solve the camera  ·  2 Scene points triangulate  ·  3 Orbit the model below

Add photos above, then pick one from the strip to start marking.
Or load the demo scene — it arrives pre-marked and solved.

100%

Pinch to zoom, drag with the loupe to aim, release to drop the point. Drag any marker to nudge it. On desktop: scroll to zoom, drag empty space to pan, click to place.

The die is a 5/8″ cube — its corners are known 3D points. Tap the corners you can see in the photo, in any order — you don’t need to know which corner is which. The solver tries every way the cube can sit and keeps the orientation that lines up; the labels it draws on the photo show which corner each tap matched. Mark at least 4, ideally 6–7, and skip corners you can’t see.

Photo—
Die corners marked0 / 8
Camera posenot solved
Reprojection error—
Orientation—
Camera distance—

Camera

Focal length—
Source—

If poses won’t solve or errors stay high, nudge the focal length — phone photos are usually close to the default.

No model yet Mark the die corners on two or more photos and the model builds itself here — die at the origin, triangulated points, the box wireframe, and a frustum for every camera.

Drag to orbit · Scroll to zoom
Right-drag to pan

Cameras

No cameras posed yet. A camera poses when its die corners solve, when it chains from triangulated points, or from a relative two-view match.

Box dimensions — spool box validation

Triangulate the 8 points named Box TFR … Box BAL and the measured spool-box dimensions land here, next to the known size.

Measure

to

—

Triangulated points

No points triangulated yet.