Box dimensions are your ground truth. Camera distances below are recomputed from the positions in the 3D scene every time you move something, so you can see a tweak pull a camera off its measured distance. PnP RMS is the fixed fit error from the die solve for that photo.
| Camera | Viewpoint | Position (in, box frame) | Dist. to die | Model dist. | PnP RMS | Source photo |
|---|
| Object | Value | Detail |
|---|---|---|
| Box | 7.5 × 11.5 × 11.5 in | White spool box, centred at origin. Top face at Z = +5.75, bottom at Z = −5.75, front (blue band) at Y = −5.75. |
| Box volume | 991.9 in³ | Recomputed live from the W × D × H controls. |
| Die | ⅝ in d6 · 4 on top | Orange, on the top face at (0.8, −1.0, 6.0625). The calibration reference for all five photos. |
| Method note | PnP + placement | Die PnP gives camera distances of 19–22 in (RMS 9–17 px), but the die frame flips between photos (3 different rotations at the junction anchor), so raw PnP poses aren't frame-consistent. Cameras here sit at each photo's viewpoint at its PnP distance. A sharp, bigger die — or an ArUco marker — would make the frame fully measurable. |
The five below are the baked-in source photos (v1 → v5). Add your own underneath — tap any photo to enlarge it.