Research dossier · 17 November 2026 · 54 published case studies · now a two-person R&D team

Living neurons, meet living fungus.

A literature base for a DIY bio-fungal brain–computer interface: neurons interfaced with a mycelium network, digitized onto a software layer where real work can be done — with initiation and evolution protocols, honest costs, power budgets, and the cheapest credible way in. It is no longer a solo build: it now runs as a two-person R&D loop — an archwizard on the systems and software side, an accredited chemical engineer on the chemistry and wet-lab side.

Built from 54 published systems across six domains: brain–computer interfaces, organoid intelligence, fungal mycelium networks, in-vitro neuronal networks, membranes & substrates, and hybrid systems. Every price is tagged [published] [reported] [estimated] or [unknown], exactly as the underlying research found it. Prices are index-based (vendor pages crawled within 1–14 days of the research date) — re-check before buying.

The honest headline: every component of this machine exists in published form except the one that matters most. Nobody has yet demonstrated a living neuron–fungus interface. Adamatzky's August 2026 hypothesis paper states explicitly that “no direct evidence” of fungal–neural coupling exists, and proposes exactly the co-culture + MEA experiments this project would run. This is genuine frontier work, not reassembly.
54case studies & systems catalogued (§1–§54)
$250–800to first digitized fungal signals
$8k–15kto first digitized neuronal signals (realistic)
~40M×slower: fungal signal propagation vs. neuronal conduction
~90 Wstarter-system home draw (incubator via community lab)
0published neuron–fungus co-cultures found, anywhere

The team — two seats, one junction

This stopped being a solo build. The project now runs as a two-person R&D team: a technomancer who builds the systems and the digitization layer, and an accredited chemical engineer who brings the chemistry, the biology, and wet-lab discipline. Every protocol below carries an owner, and the two halves meet where it matters most — the hybrid junction experiments, which neither seat can run alone.

Seat one · Systems & software

Maxx — the Archwizard

A scholar-technomancer: inventing magic with technology. Maxx holds the vision and the architecture — how living tissue becomes data, and what the combined system is for.

  • Owns: the digitization layer — acquisition rigs, spike sorting, the NWB data record
  • Owns: the BCI software stack — BrainFlow, LSL, classifiers, closed-loop code
  • Owns: the human EEG phase (Phase 3) and the fungal computing & sensing analysis
  • Owns: the knowledge layer — this dossier, the research record, the funding narrative
Seat two · Chemistry & wet lab

Jake — chemical engineer

An accredited, educated chemical engineer, with research experience on the amygdala and a working interest across neurology, biology, and chemistry. He is the credentialed half of the bench — the reason the neuronal side of this project is now realistic rather than aspirational.

  • Owns: wet-lab rigor — sterile technique, culture health, media and feeding schedules
  • Owns: substrate & interface chemistry — PEDOT:PSS, hydrogels, coatings, electrode materials
  • Owns: the neuronal side — cell sourcing, plating, culture viability, BSL practice
  • Owns: experimental discipline — controls, replicates, and not believing a result until it survives both

Where the seats meet

The junction. A co-culture experiment is simultaneously a chemistry problem (shared medium, permeable barrier, interface materials — Jake) and a measurement problem (electrodes, acquisition, coupling statistics — Maxx). Phases 5–7 are deliberately co-owned, and no phase gate closes on one person's say-so: the engineer checks the wizard's data pipeline, the wizard checks the engineer's culture claims, and the record holds both.

The R&D loop — how the two seats work

One repeating cycle, run weekly, with a hard gate between phases. The loop is the real instrument: it is what turns two people's spare hours into compounding evidence instead of parallel hobbies — and it is the structural answer to this field's replication problem (§13), because every result passes a second, differently-trained pair of eyes before it is believed.

1

Propose Both

The experiment is written down before anything is built: a falsifiable hypothesis, the controls, and what number would settle it. Either seat can propose. Jake stress-tests the chemistry and biology; Maxx stress-tests whether the measurement can actually see the claimed effect.

2

Build & run Phase owner leads

The phase owner runs the work. The other seat reviews the setup before the run starts — sterile technique, electrode contact, code path — because a second pair of eyes is the cheapest control in the whole project.

3

Digitize Maxx

Data and bench notes land in the record the same day: NWB/CSV for signals, a written log for wet work, everything indexed. If it isn't recorded, it didn't happen — the data layer is what makes the work fundable and publishable later.

4

Review Both · weekly

A weekly joint session: data against hypothesis, anomalies first. Each result gets one of three verdicts — replicate it, extend it, or kill it — and the next experiment is chosen there, not mid-week on impulse.

5

Gate Both sign off

A phase closes only when its exit criterion (below) is met and both seats sign off. The next phase's budget unlocks at the gate, not before — this is what keeps a two-person budget from diffusing across seven half-finished phases.

Phase ownership

PhaseLeadThe other seat
0 · Skills & sterile techniqueSplitJake owns the bench (sterile technique, agar work); Maxx owns the software stack setup — both finish before Phase 1 starts
1 · First digitized fungal signalsBothJake: growth, substrates, chamber chemistry · Maxx: recording rig, digitization, spike statistics
2 · Fungal computing & sensingMaxxJake runs the PEDOT:PSS-infusion chemistry (§54) and sensor-materials work
3 · Human EEG (learn BCI on yourself)MaxxJake reviews the pipeline and the safety rules (battery power only) before first use
4 · Access & first neuronsJakeMaxx supports the lab / university outreach and sets up the neuronal data plan in advance
5 · First digitized neuronal signalsBothJake: cultures, plating, viability · Maxx: MEA acquisition, spike sorting, burst statistics
6 · Closed-loop learningMaxxJake keeps cultures healthy through training and owns the control conditions
7 · The hybridBoth, jointlyThe junction experiments — co-culture chemistry and coupling measurement designed together, run together, judged together

The timescale problem — the whole design in one picture

Neurons spike in milliseconds. Fungal spikes last minutes to hours and propagate at ~40 cm/h (~0.11 mm/s, §28) — roughly 40-million-fold slower than neuronal conduction. Any hybrid must treat mycelium as a slow modulatory / context layer, never a peer spike network. Close the loop at the burst-envelope level (seconds) on the neuronal side and the spike-train level (minutes–hours) on the fungal side.

Fungus = sensor + context

Mycelium's near-term value is as a living multi-modal sensor — moisture, pressure, chemistry, temperature (§31) — and a slow state layer feeding the fast system.

Neurons = fast compute

The neuronal culture does the millisecond work. Best architecture: reservoir computing — biology as a rich nonlinear reservoir, cheap silicon readout trained on top (§15).

The junction = the experiment

Adamatzky's hypothesis (§50) is explicitly falsifiable via co-culture + MEA. A positive coupling measurement — or a bounded null — is the publishable result.

Capital estimates & power

Ranges, not single numbers. Assumptions: no institutional overhead, community-lab membership where stated, builder's time unpaid (the dominant real cost), consumables at list price. Excluded: LN₂ storage setup [unknown], microscope (budget $500–2,000 used [estimated, unsourced — verify]), cell shipping/cold-chain, and failed cultures (budget 2–3× cell cost for learning-curve losses).

Cost to each milestone

First fungal signals
$250–800
First neuronal signals
$8k–15k
Useful research platform
$25k–60k
Buy it instead: CL1 unit
$35,000

Low / mid points from the research: fungal $200 / $500 · neuronal $6,000 / $12,000 · platform $15,000 / $35,000. Rent-the-biology route (FinalSpark): $500/mo (2024, academic) to $1,000/mo + $1,000 setup; 2026 pricing is contact-only. CL1 cloud ≈ $300/week [reported]. Neither commercial route has any mycelium capability.

Power budget

ComponentDraw
CO₂ incubator (150–165 L)~100–300 W avg[estimated]
Laptop / PC (acquisition, sorting)60–150 W[estimated]
MEA2100-class amplifier~20–50 W[estimated]
Intan RHD USB system~10–20 W[estimated]
Mycelium chamber (mister/fan/LED)~5–15 W[estimated]
Raspberry Pi 5~7 W[reported]
CL1 unit (reference)~30 W[reported]

Starter total (fungal + neuronal tiers, incubator via community lab): ~90 W continuous-equivalent ≈ 2.2 kWh/day. With your own incubator: ~200–400 W ≈ 5–10 kWh/day ≈ $22–45/month at an assumed $0.15/kWh (verify local rate). The incubator dominates by an order of magnitude — the strongest argument for the community-lab route. Incubator max ratings are 376–900 W [published]; averages are thermostat-cycled estimates.

Initiation protocol — zero to hybrid, in order

Build in order of increasing cost and decreasing reversibility: fungi first (cheap, forgiving, BSL-1), human EEG second (learn the software stack on yourself), neurons last (expensive, fragile, regulated). Every phase ends with digitized signals and a publishable artifact. Each phase now carries its owner — Maxx systems & software, Jake chemistry & wet lab, Both where the work is genuinely shared — and closes only at the joint gate described in the R&D loop above.

0

Skills & sterile technique · weeks 1–2 · ~$50 Split lead

Still-air box or DIY flow hood, pressure cooker as autoclave, PDA plates, agar transfers. Grow oyster mycelium on agar and grain. Read Adamatzky's methods (§24) and the DishBrain paper (§13) end to end. Set up Python, BrainFlow, SpikeInterface, LSL on a laptop.

Exit: clean agar plates, 3 contamination-free transfers in a row.

1

First digitized fungal signals · weeks 3–6 · ~$200–500 Both

Oyster grain spawn ($20) on hemp pads / straw in a humidity-controlled tub. Recording rig: Raspberry Pi 5 4GB ($110 [published]) + ADS1256 24-bit ADC (~$13) + stainless needle electrodes (~$30 [estimated]). Record at 1 Hz, 24-bit, differential pairs — Adamatzky's stack (§24) at ~1/30th the cost of his $809 Pico ADC-24. Log CSV → HDF5/NWB. Replicate the thermal-stimulus cluster experiment (§22).

Exit: 7+ days continuous recording with spontaneous spikes (0.3–1 mV, minutes long) and a stimulus response; spike-train statistics computed.

2

Fungal computing & sensing · weeks 7–12 · +$100–300 Maxx leads

8–16 electrode arrays on colonized blocks; impedance spectroscopy for colonization monitoring (§32); stimulus–response mapping (moisture, pressure, temperature, light) into a sensor calibration (§31); FHN-model gate mining (§25); the PEDOT:PSS-infusion experiment (§54).

Exit: a characterized mycelium sensor with a calibration curve, and one mined logic gate — or a documented failure with numbers.

3

Learn BCI on yourself · parallel, weeks 4–10 · ~$460–550 Maxx leads

PiEEG-8 ($350 [published]) + Pi 5 + electrodes/cap (~$100 [estimated]). Build a P300 speller (§10) and SSVEP demo (§11) with BrainFlow; record your own motor imagery (§12). The pipeline, LSL streaming, classification and closed-loop software built here is reused verbatim for the neuronal rig. Battery power only — never mains on a person.

Exit: working P300 speller at >80% accuracy and an SSVEP demo.

4

Access & first neurons · months 4–6 · ~$1,000–2,500 + membership Jake leads

Join a community lab with a tissue-culture room (~$100/mo [reported]) or secure a university collaborator — this solves BSL-2 space, incubator access, and the institutional ordering barrier in one move. Order primary rat cortical neurons (Gibco $908 / Lonza $822 [published]) + B-27 Plus system ($303) + poly-D-lysine ($157). Plate, feed (half-media changes every 2–3 days), learn microscopy. Do not buy an incubator yet — use the lab's.

Exit: a healthy 14-DIV cortical culture with visible networks.

5

First digitized neuronal signals · months 6–9 · ~$3,500–6,000 Both

Build the Piphys-class rig (§36): Intan RHD USB interface ($2,755) + RHD2132 headstage ($895) or the $350–450 DIY headstage (§42); MCS 60-electrode TiN MEA chips (€306 each). Record spontaneous activity; spike-sort with SpikeInterface + Kilosort4.

Exit: sorted single units with stable waveforms over a 30-minute session; raster plots and burst statistics.

6

Closed-loop learning · months 9–12 · ~$500 more Maxx leads

Shahaf & Marom contingent training (§33) first, then the DishBrain Pong protocol (§13) with an RHS2116 stim-capable headstage. Metrics: rally length, ace rate, long-rally fraction. Run controls (medium-only, open-loop) from the start — given the field's replication controversy, your controls are your credibility.

Exit: a statistically significant learning effect with controls — or a documented null with power analysis. Either is publishable.

7

The hybrid · months 12–18+ · ~$1,000–3,000 more Both — the junction

Execute the Adamatzky hypothesis test (§50): neuron–mycelium co-culture on MEA behind a permeable barrier (shared medium, no cell mixing) → direct-contact co-culture → PEDOT:PSS-infused mycelium bridge (§54). Test both directions: does neuronal stimulation modulate fungal spiking? Does fungal activity modulate neuronal firing? Frame it as a coupled reservoir (§15) and train silicon readouts on combined features.

Exit: the first quantitative measurement of neuron–fungus electrophysiological coupling — or its absence, with bounds.

Evolution protocol — how the hybrid develops

Ownership splits along the two clocks: Jake owns the biology — culture schedules, media chemistry, viability calls — while Maxx owns the measurement of maturation (impedance tracking, coupling statistics, readout training). The training ladder itself is joint work: neither seat declares “functional coupling” alone.

Two biological clocks

Neurons: plating → neurite outgrowth & first synapses (days 3–7) → first synchronized bursts (days 10–14) → mature bursting (days 14–21) → peak experimental window weeks 3–8 → decline over months 2–6 (peptide hydrogels extend viability to ≥5 months, §45; FinalSpark organoids ~100 days, §16; CL1 ~6 months, §17). Plan experiments in the day-14–60 window; keep 2–3 cultures staggered a week apart.

Mycelium: spawn run 10–12 days at 22–28 °C → full colonization in 2–4 weeks → electrically active for months with humidity maintained; dehydrated blocks store 6–12 months and revive (§31/§32). Mycelium is the long-lived partner; neurons are the short-lived one — design the fungal layer to persist across neuronal generations.

Interface maturation & training ladder

  • Physical contact — hyphae grow toward/around electrodes and the neuronal compartment (days–weeks; steer with geometry, moisture gradients, barriers).
  • Electrical contact — inter-compartment impedance falls as hyphae bridge gaps; monitor by impedance spectroscopy (§32).
  • Functional coupling — correlated activity appears (or doesn't); quantify with cross-correlation and transfer entropy between fungal slow waves and neuronal burst envelopes.
  • Adaptive coupling — if coupling exists, closed-loop training (§33/§13) applied across the junction should strengthen or weaken it.
  • Training ladder: characterize each subsystem alone → train neurons alone → reservoir readout on the combined system → cross-junction training (fungal state as context; neuronal output as fungal stimulus) → test for capabilities neither shows alone.

Milestones

M0 First fungal spike recorded
M1 7-day continuous fungal recording
M2 Fungal stimulus–response curve
M3 Working human EEG BCI (P300)
M4 Healthy 14-DIV neuronal culture
M5 Sorted single units from MEA
M6 Closed-loop learning effect, with controls
M7 First co-culture on MEA (barrier)
M8 Quantitative coupling measurement (positive or bounded-null)
M9 Coupled-system reservoir task beats either subsystem alone
M10 3-month continuous hybrid operation

Case library — all 54 studies

What was built, what it showed, and what to steal — condensed from the research report, with the primary source on every card. Filter by domain or search by name, technique, or number.

Steal list — ranked, most directly usable first

#TechniqueFromWhy first
1Needle-electrode + 24-bit logger fungal recording at 1 Hz (reproducible ~$25 with ADS1256)§24Cheapest digitized living signals in existence; week-1 build
2DishBrain closed-loop recipe: predictable stim = reward, unpredictable = punishment; 8-electrode sensory encoding; rally/ace metrics§13Fully published training protocol; needs no HD-MEA
3Reservoir computing: biology as nonlinear reservoir + trained silicon readout§15Sidesteps “does the dish learn?”; works with any rich dynamics, incl. mycelium
4Intan RHS2116 + Open Ephys + RHX stack; DIY headstage with FPC connector§42, §36Only affordable open path to bidirectional spike recording
5Piphys: Pi + Intan, $819 / 32 ch, published noise figures§36Reference DIY rig design
6Shahaf & Marom contingent-stimulus-removal training§33Simplest closed-loop learning protocol; one threshold detector
7PiEEG-8 as universal biosignal front-end (ADS1299, 16 kSPS)§3Cheapest credible EEG/EMG/ECG + slow-signal board
8PEDOT:PSS electrodeposition; respect −0.6 V limit; design against delamination§43Order-of-magnitude impedance win on cheap electrodes
960-electrode TiN MEA as standard consumable (€306, reusable)§39Every protocol assumes this format
10Adaptive reinforcement thresholds (cultures drift; fixed thresholds fail)§34Difference between a demo and a working trainer
11Neuron–astrocyte co-culture for viability§37, §18Glia are infrastructure, not garnish
12SpikeInterface + Kilosort4 + NWB as the software stack—Free, standard, publication-grade
13Dehydration-preserved fungal components; humidity control = signal integrity§29, §32Fungal parts are storable; humidity is an electrical spec
14Mycelium as living multi-modal sensor§31The near-term useful product of the fungal side
15Bioprinting / defined-geometry placement of cells§30, §48How you eventually place neurons and mycelium together
16PEDOT:PSS-infused mycelium (make the fungus the electrode)§54Highest-upside interface experiment
17Decoder robustness over electrode count (Neuralink's software rescue)§5Design decoders that survive electrode loss
18Surface recording is “good enough” (Layer 7)§8Validates the non-penetrating MEA approach
19Peptide hydrogels for ≥5-month 3D culture§45Long-term viability window for a living computer
20Slime-mould network optimization as a design metaphor§51–52Let the biology solve wiring problems

Starter bill of materials

Tier A — Fungal rig (~$300 [estimated])

Raspberry Pi 5 4GB$110[published]
ADS1256 24-bit ADC module~$13[reported]
Oyster grain spawn, 5 lb$20[published]
Substrate + tub + humidity~$40[estimated]
Needle electrodes + wiring~$35[estimated]
Still-air box + agar supplies~$40[estimated]
microSD, power bank, cables~$40[estimated]

Tier B — add human EEG: PiEEG-8 $350 [published] + electrodes/cap ~$100 → ~$450 more. First mycelium network alone (spawn, substrate, chamber, sterility): ~$100–250.

Tier C — Neuronal MEA (~$6,500 [estimated])

Intan RHD2000 USB interface board$2,755[published, older]
Intan RHD2132 32-ch headstage (or DIY $350–450)$895[published, older]
MCS 60MEA TiN chips ×3 (€306 ea)~$1,000[published]
Primary rat cortical neurons ×1 vial$822–908[published]
B-27 Plus culture system + poly-D-lysine~$460[published]
Incubator access (community lab, 3 mo)$300[reported]
Consumables~$300[estimated]

Tier D — own incubator instead: add $3,480–7,321 new / ~$4,750 used [published]. Media burn ≈ $300/month at list prices [estimated].

First neurons — full sourcing comparison
SourcePriceNotes
SH-SY5Y neuroblastoma line (2 vials × 1M)$395–420Cheapest; immortal; poor learning model — practise technique only
Primary rat cortical neurons, 4M (Gibco)$908The right first real substrate; ~4–8 MEAs per vial; use on thaw, never re-freeze
Primary rat cortical neurons, ≥4M (Lonza)$822Same class as above
iPSC-derived human neurons, 1M (bit.bio)$1,069 list$999/3-vial academic pack; the DishBrain/CL1 substrate class
iPSC-derived, other vendors (Ricoh)$850–1,200Per vial
Neucyte SynFire glutamatergic, >7.5M$1,550Per vial; MEA co-culture kit $3,675–4,600
Neurobasal Medium 500 mL$107–115Plus version $143
B-27 Supplement 50X, 10 mL$159Plus $194; full B-27 Plus system $303
Poly-D-Lysine coating$157All prices [published]

Recommendation from the research: learn on SH-SY5Y, do first real experiments on primary rat cortical neurons, graduate to iPSC-derived only with funding. Vendors like ATCC require institutional biosafety sign-off before shipping mammalian lines — budget for affiliation, not just the vial.

Digitization — biology → software layer

Neuronal pipeline

MEA → Intan RHD/RHS (16-bit, 1–30 kS/s) → USB → Intan-RHX / Open Ephys GUI → SpikeInterface (bandpass 300–6,000 Hz, common-average ref) → Kilosort4 (GPU) or MountainSort5 (CPU) → Phy curation → NWB export → decoding / closed loop via RHS stim or LSL

Data reality: 32 ch × 30 kS/s ≈ 6.9 GB/h raw; 60-ch MEA ≈ 4.3 GB/h; HD-MEA ≈ 148 GB/h. Storage, not compute, is the bottleneck. Record to a big external drive; sort offline; keep raw only for key sessions.

Fungal pipeline

Needle electrodes → ADS1256 / Pico ADC-24 (24-bit, 1 Hz) → CSV/HDF5 → spike-train segmentation + pattern clustering (§23) → slow features (drift, spike rate, inter-spike intervals) → LSL stream for fusion

Data reality: 1 Hz × 16 ch ≈ kilobytes/day. The fungal side is nearly free to store forever — log everything, continuously.

Human EEG pipeline

PiEEG-8 / OpenBCI → BrainFlow (BoardShim) → LSL → Python (MNE, scikit-learn) → P300 / SSVEP / motor-imagery classifiers

All tools free & open: SpikeInterface, Kilosort, MountainSort5, Phy, BrainFlow, Open Ephys, Intan-RHX, LSL, MNE-Python, Neo. Adopt NWB from day one — it's what makes data fundable and publishable. Neuronal loop latency: ms to tens of ms — adequate for §13/§33 protocols.

Funding — realistic paths, in the order to use them

Strategy in one line: self-fund Phase 1 (~$300) → Experiment.com for Phases 2–3 (~$2,000–5,000) → community lab for Phase 4 → university partnership for Phases 5–7 and NIH-scale funding. Do not write an NIH grant before you have fungal data and a collaborator.

PathWhat it paysWhat it requiresRealism
Experiment.com crowdfundingAverage raise ~$5,000 [reported]; 48.08% success rateClear, feasible, hypothesis-driven proposal; staff review; IRB for human/animal work; lab-notebook reporting. Fees 8% + 3–5%Best fit for Phases 1–3. A fungal-BCI campaign is exactly the kind of vivid project that funds
Community lab (Genspace, BioCurious…)Bench + incubator + TC room ~$100/mo (+$100 setup)Membership, safety class, project safety-board review; BSL-1 only at BioCuriousThe practical starting point for cell work — confirm per-lab what neuronal work is permitted
University partnershipLab space, BSL-2, incubator, ATCC account, ethics approval, co-authored grantsA faculty collaborator; IBC protocol; shared IP termsHighest-leverage move. Approach with Phase 1–2 fungal data in hand, not an idea — and the approach is stronger with Jake on the team: an accredited chemical engineer as wet-lab lead is exactly the credential a faculty collaborator wants to see
FinalSpark free accessFree Neuroplatform access for selected projectsA selected proposalWorth applying with a sharp organoid-vs-mycelium comparison
NIH BRAIN InitiativeR01 tool-dev: $8M total / 6–9 awards; R61 up to $700k; SBIR Phase I→IIAn institution — grants go to universities, hospitals, 501(c)(3)s, or small businesses, not individuals; PI + grants office + IBCOnly via partnership or a founded small business. 6–12 month lead. The endgame, not the start
Open-source sponsorshipGitHub Sponsors / Open Collective — amounts [unknown]A public repo people useSupplemental only — consumables money, not capital
Commercial rental (benchmarking)CL1 cloud ~$300/wk; FinalSpark ~$500–1,000/mo [reported]Payment; ~1 week provisioning lead (CL1)Budget one month to benchmark DIY results — not a subscription

Low barrier to entry — and what never to skimp on

Cheapest credible entry: the fungal rig, ~$200–300, digitized living signals in under a month. Highest learning per dollar after that: (1) replicate Adamatzky's recording + thermal-stimulus experiments — publishable replication, ~$300; (2) spike-train “language” statistics (§23) on your own data — free beyond the rig; (3) reservoir computing with mycelium as the reservoir (§15 architecture) — free beyond the rig, genuinely novel; (4) the full DishBrain protocol in simulation (Brian2/NEST) before touching cells — free.

Never skimp on: sterile-technique supplies (contamination is the #1 killer) · ADC resolution (fungal signals are ~0.5 mV — 24-bit is the floor, not a luxury) · electrode contact quality (beats channel count, §5) · incubator stability (a flaky DIY incubator is the most expensive “saving” in the project) · LN₂ storage (cells at −70 °C lose viability — don't order until you can store or plate immediately) · controls (medium-only, open-loop, unstimulated — in parallel, every time) · safety compliance.

Safety, sterility & the access blocker

Do not culture mammalian neurons at home. All human, primate, and mammalian cell lines require BSL-2 practice (ATCC guidance; OSHA Bloodborne Pathogens Standard). A home workspace has no biosafety cabinet, no controlled waste stream, no exposure-control plan. ATCC/BEI accounts require institutional biosafety-officer assurance and lab inspection before shipment — a home address with no institution will likely be refused. The community-lab or university route is the workaround, not an optional upgrade.

Biology & sourcing

  • Fungi: Pleurotus ostreatus (oyster) is edible, BSL-1, recommended. Aspergillus niger (§25/§26) is generally BSL-1 but sheds abundant allergenic spores — still-air box, don't inhale. Never work with pathogenic fungi; never ingest experimental cultures.
  • Animal tissue: buy cryopreserved primary neurons (vendor holds approvals). Dissecting your own rat embryos at home would require animal-ethics approval — do not do it.
  • iPSC cells are research-use-only; some vendors restrict to academic/non-profit buyers. SH-SY5Y needs an MSK express licence for for-profit use.
  • Waste: mammalian cell waste is regulated medical waste (bleach-decontaminate liquids, sharps containers). Fungal waste: pressure-cook before disposal.

Chemicals, electricity & claims

  • Chloroform (§24 anaesthesia experiment) is toxic, a suspected carcinogen — do not repeat without a fume hood. Retinoic acid is a teratogen; DMSO carries solutes through skin — gloves.
  • Human EEG: battery power only (PiEEG's explicit rule). Never connect mains-powered gear to electrodes on a person.
  • Stimulation: respect the −0.6 V PEDOT:PSS limit (§43) and current limits for cultures.
  • Claims: nothing here is a medical device — make no medical claims. Organoid-consciousness ethics are actively debated (Baltimore Declaration, §18); keep organoids small and task-focused.

Open questions — what the research could not verify

  • Neuron–fungus coupling: no direct evidence exists (§50). The project's central hypothesis is untested — that is the point of Phase 7.
  • DishBrain replication: contested. No independent replication outside Cortical Labs collaborators as of the Oct 2026 critical review consulted; the group's own 2025 paper failed to reproduce significant learning in untreated cells, and a 2024 study saw similar Pong improvement in non-living polymer jelly. Treat DishBrain numbers as promising but provisional.
  • Prices not verified live: the research browser was unavailable; all prices are index-based. Pi and semiconductor prices moved several times in 2026 — re-check before purchasing.
  • MCS MEA2100 list price [unknown] — anchored only by a 2019 public contract (€35,977 for a full set). MaxWell MaxOne/MaxTwo list prices [unknown] — anchored by a 2023 NIH purchase order ($176,600).
  • Intan prices come from an undated community wiki — current list prices unconfirmed. FinalSpark 2026 pricing is contact-only; $500–1,000/mo figures are 2024. CL1 $35,000 is launch-unit reporting; current price may differ.
  • LN₂ storage, microscope, and cold-chain shipping costs were not sourced [unknown].
  • Community-lab neuronal policy varies — BioCurious is strictly BSL-1; confirm per lab whether primary neuronal culture is permitted.
  • Electricity rate of $0.15/kWh was assumed for running costs — verify locally.